9009PW Sportswear Poly White - 5Gal
9008PW Titan Poly White is a High opaque White designed for 100% Polyester T-Shirts offers great Bleed Resistance on all 100% Polyester and Poly-blend fabrics.
WM POLYFLEX High Opaque /Low Bleed (HO/LB) inks are formulated to be directly printed onto medium to dark colored, cotton/polyester blends,100% polyester & nylon garments. These inks provide great coverage and have a creamy body unlike most bleed resistant inks, therefore making the ease of printing simpler. Please note that tightly woven nylon garments will require a nylon additive for adhesion. POLY HO/LB colors are Non-Phthalate Plastisol (Midori Series)
Recommended for printing on: Polyester Drifit Shirts & Polyester Bags
PRINTING RECOMMENDATIONS:
Substrate:
100% Polyester and Poly-blend fabrics
Bleed Resistance & Opacity:
High
Storage:
Ideally 65 to 80 F. Keep out of direct sunlight & heating equipment.
Recommended Mesh:
86-160 (34 to 62 threads per cm)
Stencil/Emulsion:
Textil PV, Grafic HU & Textil DW.
Wet on Wet Printing: Can be printed wet-on-wet to increase production.
Modifications & Additives:
| Reduce Viscosity: | 3000FF Curable Reducer |
Mix: 10% |
| Improve Stretch: | 3010FF G&S/Stretch Base |
Mix: 10-15% |
| Puff 3D Effect: | 3040FF Puff Additive |
Mix: 5-10% |
| Extend color: | 3001FF Soft Hand Clear |
Mix: 10-20% |
| Matte finish: | 3035FF Suede/Dulling Base |
Mix: 5-15% |
- Squeegee & Angle: 70duro Medium at a 45 degree angle with Sharp Blade
- Flashing: 210ºF for 9 seconds, just enough for the surface to be tack free.
- Fusion/Curing: 260F to 295F for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased.
- Wash-up: PPW Press Wash (Press Wash)
Special Notes to user: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.
High Opaque Low Bleed inks are designed for printing on Polyester fabrics such as Jerseys, Athletic uniforms and Poly blend fabrics that are pron to dye-migration.
Curing tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.
Our Plastisol inks are Non-Phthalate Certified and in compliance with C.P.S.A., Tittle 16, Part 1303 and Federal Hazardous Substance Act Part 16 of Lead Content and certain phthalate plasticizers.
HOURS of OPERATION:
- Monday to Friday: 8:30am to 5pm
- Saturdays: 9am - 1pm
WE ARE LOCATED AT:
2681 WEST 81 Street, Hialeah, FL 33016
Tel: 305-512-2222